The synthetic response is 50+10A+5B−4A²−3B²+2AB on a two-factor, three-level grid. Fit a full quadratic in coded factors, then maximize the response with desirability limits 0 and 100. This noiseless fixture verifies calculation flow; it cannot provide a realistic estimate of experimental error. A numerical candidate must be confirmed experimentally. Only continuous factors are supported; no categorical or mixture interpretation is implied.
Figure data
| Series | Run order | Response (synthetic units) |
|---|---|---|
| Measured response | 1 | 30 |
| Measured response | 2 | 36 |
| Measured response | 3 | 36 |
| Measured response | 4 | 42 |
| Measured response | 5 | 50 |
| Measured response | 6 | 52 |
| Measured response | 7 | 46 |
| Measured response | 8 | 56 |
| Measured response | 9 | 60 |
Reproduce the example
Open the tool, enter the input below or copy it from the downloadable JSON, and select the stated options. These are synthetic measurements.
{
"tool": "doe",
"csv": "A,B,Y1\n-1,-1,30\n-1,0,36\n-1,1,36\n0,-1,42\n0,0,50\n0,1,52\n1,-1,46\n1,0,56\n1,1,60",
"factors": [
{
"name": "A",
"unit": "coded",
"low": -1,
"high": 1
},
{
"name": "B",
"unit": "coded",
"low": -1,
"high": 1
}
],
"model": "quadratic",
"goals": [
{
"goal": "max",
"low": 0,
"high": 100,
"target": 100
}
]
}Computed output
| R2 | 1 |
|---|---|
| codedCandidate | [1, 1] |
| desirability | 0.6 |
Open DoE and numerical optimization Download exact input and output
Generated by scripts/build_content.py using the same scientific functions as the application. Independent numerical validation is documented in the source package; no commercial reference program was executed.